Contact Us

Tel: +86-510-83888805

Fax:+86-510-82620085

Mr. Alfred Van (Sales Dept.)

Cell/Skype/Whatsapp/Wechat:+8615821208506

Email: alfred@lebron-machinery.com

Adress:1604#, Yangming Sicence & Technology Industry Center, No.855 Nanhu Avenue, Wuxi city, Jiangsu, China

Home > Knowledge > Content
The function demand of the control system of the Double Layer Roll Forming Machine when we make the designation
Mar 23, 2018

We all know, for the Double Layer Roll Forming Machine, its working needs the control system. In the other hand, when we design the control system, we should  also consider that it can meet the function demand of the Double Layer Roll Forming Machine. Now, let’s start to know some main contents of this.

 

At first, the control system of the Double Layer Roll Forming Machine can be divided into manual operation type and automatic type. If adopts the manual operation, that is to use the point movement method do the steel plate loading and zero position calibrating. When set up as the automatic type, the system can automatically complete the molding and shearing of the steel plate.

 

Secondly, during the working of the Double Layer Roll Forming Machine, we should fully consider that can it automatically check whether there is the materials on the uncolier. Generally, the system should meet such demand when we make the designation: the machine can keep working when there is the materials on the uncoiler. It will alarm and stop automatically if there is no material on the uncolier.

 

Third, according to the production demand, we should do the good control and management on the working speed of the Double Layer Roll Forming Machine. Normally, It can realize the speed adjustment through the frequency converter.

Fourth, Should make sure that the control system can do standard length cutting when the Double Layer Roll Forming Machine is working. User can set up cutting sizes and quantity on the touch screen, and change the parameters according to different requirements.

 

Fifth, during the control system designation of the Double Layer Roll Forming Machine, we must guarantee the precision of the cutting. Generally, we should keep the cut precision within a range. The cutting tolerance should not more than 0.1mm. In general, the control system designation of the Double Layer Roll Forming Machine mainly including the Control section, Input mode and Output mode, etc.

http://www.rollerformers.com/


Previous: Roof sheet roll forming machine application and development prospects

Next: The main components and technical parameters of Roof Sheet Roll Forming Machine